BS Approved easy to install / un-install
universal Viper can baffle, inserts into end
section of straight-through cans, simple bolt
fixing secures baffle in place.
Any protruding baffle can be easily trimmed
to fit flush with the exhaust nozzle.
N.B. Fitting requires drilling hole into nozzle
of exhaust can.
A = 48mm
B = 28mm
C = 32mm
Designed for use with Viper oval and round
cans this angled dB Killer simply bolts into the
end of Viper cans to reduce noise emission.
Order Code: EXCKILL
This carbon fibre shield simply straps over
Viper oval cans, protecting covered area from
impact knocks and scratches.
Can be located anywhere along the can,
especially effective on the front end, the
most common point of impact when bike is
dropped or crashed*.
* Viper Can Shield helps to minimise damage to cans, it is
not a guarantee of no damage.
Order Code: EXCPROA
Rubber stopper with allen bolt
fitting, replaces or upgrades existing
stopper to protect bike stand contact
with link pipe.
Order Code: EXCRUB01
N.B. Requires drilling at exhaust outlet
Centre Stand Stopper
Order Code Description
EXCSTB Can strap 28mm hanger
EXCSTC Can strap 43mm hanger
EXCSTD Can strap 48mm angled
hanger 370mm inner
Order Code Description
BAN2931 Banjo clamp 29-31mm
BAN3134 Banjo clamp 31-34mm
BAN3437 Banjo clamp 34-37mm
BAN3740 Banjo clamp 37-40mm
BAN4043 Banjo clamp 40-43mm
BAN4447 Banjo clamp 44-47mm
BAN4851 Banjo clamp 48-51mm
BAN5255 Banjo clamp 52-55mm
BAN5559 Banjo clamp 55-59mm
BAN5963 Banjo clamp 59-63mm
BAN6368 Banjo clamp 63-68mm
Replacement can straps to hang exhaust
cans from footrest hangers and banjo clamps
to secure connecting pipes to slip-on cans
Viper Spares VEipxehr Sapuasret sPacking Sheets
Easy-use sheets of sound absorption media, manufactured from highly voluminised
continuous filament glass yarn using sophisticated texturisation techniques. Suitable for both
street and off-road applications.
The material is uniquely compressed and stitched together with a fine low temperature melting
thread, which dissolves on contact with exhaust gas, releasing the compressed fibres to
expand and fully fill chamber voids. Ideally suited for repacking non-uniform shaped cans
such as oval and tri-oval, which can be tricky to repack correctly with standard materials.
Easy to use;
> available in 3 lengths to suit most popular exhaust sizes (length can also be trimmed for
> no need to use stainless steel wool to cover the perforated pipe
> simply wrap sheet around the perforated pipe and cut to attain the required fill volume (each
sheet is 1M wide)
> higher temperature resistance (up to 1000íC), eliminating need for s/s wool
> high resistance to High Pulse Compacting
> increased sound absorption compared to traditional materials
> improved thermal insulation - reduced need for internal or external heat shields
> more efficient than conventional needle mat or blown-in fibre products
Order Code Size
EXCPCK350 350mm x 1M
EXCPCK400 400mm x 1M
EXCPCK450 450mm x 1M
Fibres compressed by
Fibres expanded after thread has melted
Batteries & Chargers
Servicing Tyres & Tubes
Lifts & Stands
Copyright © Bikeit Direct
We are a dealer for Bike-It and this site is not affiliated to Bike-It in any way. Customer services: 0207 1007837
We do not hold stock of bike-it products, and order from BikeIt once a week. It may take up to 2 weeks to dispatch an order.